The Single Wick - EZ Wick Setter
Bringing the container wicking process out of the dark ages
and into the 21st Century, we proudly introduce the EZ Wick Setter (Single). If
you are anything like most folks, you dislike wicking containers, especially if
you are facing a table full of them.
We are not suggesting that you can't get your wick centered.
What we are saying is, this ingenious product will save a tremendous amount of
your valuable time and we don't know many candlemakers who aren't usually busy.
Of course, if you happen to be centrally challenged (like me), you will love
your new EZ Wick Setter.
For the Single Wick Setting Tool
The EZ Wick Setter was designed to fit a large number of the
most popular containers used by candlemakers. Setting the tool up for different
size and depth containers is a snap and only takes a few seconds.
Step 1. Place your EZ Wick Setter in the size container you want
to wick. Loosen the thumb screw and allow the wick tube magnet to rest on the
bottom of the container.
Step 2. Push the collar down, depressing the spring until it
rests against the stop. While holding the collar down against the stop, tighten
the thumb screw. Caution: Do not over tighten the thumb screw.
Now your EZ Wick Setter is set up for that size and height
Step 3. Attach a Wick Stickum™
(or other adhesive) to the bottom of the wick tab. Insert
a wick into the wick tube until the metal wick tab rests against the magnet.
Step 4. Place the EZ Wick Setter in the container. While
holding the EZ Wick Setter firmly and squarely on the container, depress the
handle, setting the wick in the container. NOTE: It is not necessary to use
excessive force when setting the wick.
Step 5. Remove the EZ Wick Setter from the container and
repeat the process for the remainder of your containers.
It's that quick and easy! Your container now has a wick that
is perfectly centered and seated.